TNEA Councelling Code : 2377


Publication Details

Publications 2024 Publication
1 Lutetium gallium garnet (Lu3Ga5O12): A potential material for supercapacitor and pesticide detection applications
Seerangan Selvam, G., Dheivasigamani, T., Ammasai, K., Sthevan Kovil Pitchai, J.
Journal of Alloys and Compounds | Vol. 973 | 172842 | 2024
2 Synthesis of sustainable curcumin based photo-crosslinkable benzoxazines: Thermal, hydrophobic and anti-corrosion properties.
Priyanka Madesh, Hariharan Arumugam, Balaji Krishnasamy, Alagar Muthukaruppan
Journal of Molecular Structure | Vol. 1296 | 136902 | 2024
3 Influence of stacking sequence and halloysite addition on the fracture toughness and low-velocity impact strength of carbon/glass fiber reinforced hybrid composites.
K. C. Nagaraja, G. Rajeshkumar, M. R. Sanjay, Suchart Siengchin
Polymer Composites | Vol. 45 | Issue 1 | Pages: 328 – 337 | 2024
4 Bio-polymer based thermally stable composites as catalytic support materials for energy harvesting process
Arunkumar Krishnan, Pradeeswari Kanniyappan, Selvaraj Vaithilingam, Latha Govindraj, Alagar Muthukaruppan
International Journal of Hydrogen Energy | Vol. 50 Part B | Pages: 1484-1495 | 2024
5 Investigating the Effect of Varied Short Bamboo Fiber Content on the Thermal, Impact, and Flexural Properties of Green Epoxy Composites
Mohammad Jawaid, K. Senthilkumar, M. Chandrasekar, Hassan Fouad, Mohamed Hashem, Ahmad Safwan Ismail, Ramzi Khiari, Balbir Singh
Journal of Natural Fibers | Vol. 21 | Issue 1 | 2296915 | 2024
6 Infilled steel tubes as reinforcement in lightweight concrete columns: An experimental investigation and image processing analysis
Divyah N., Prakash R., Srividhya S.
Computers and Concrete | Vol. 33 | Issue 1 | Page 41 – 53 | 2024
7 Enhanced asymmetric supercapacitor device performance of graphene templated β-Bi2-xEuxMo2O9 nano self-assembly
Jesman Sthevan Kovil Ptchai, Bagavathy Shunmughananthan, Priyadarshini Shanmugam, Govarthini Seerangan Selvam, Alagar Muthukaruppan, Thangaraju Dheivasigamani, Sivakumar Periyasamy
Journal of Electroanalytical Chemistry | Vol. 952 | Issue 1 | 117983 | 2024
8 Wire Electric Discharge Machining of Aluminium Hybrid Composite: Renewable Energy Based IoT Approach
Hariharan S., Marimuthu U., Sundaresan T., Shanmugam S. K., Radhakrishnan R. G.,Mierzwinshi D., Walter J.
Journal of Current Science and Technology | Vol. 14 | Issue 1| 12 | 2024
9 Intelligent accident detection system by emergency response and disaster management using vehicular fog computing
M Ramya Devi, S Lokesh
Automatika | Vol. 65 | Issue 1 | Pages 117 – 129 | 2024
10 Vanillin derived partially bio-based benzoxazine resins for hydrophobic coating and anticorrosion applications: Studies on syntheses and thermal behavior
Subasri Appasamy, Guruselvalakshmi M, Balaji Krishnasamy, Sasikumar Ramachandran & Alagar Muthukaruppan
Polymer-Plastics Technology and Materials | Vol. 63 | Issue 3 |Pages 287-298 | 2024
11 Electrochemical Corrosion Behavior of Thermally Sprayed Nichrome Coating on Duplex Stainless Steel
Roshan Kuruvila, Thirumalai Kumaran Sundaresan, Farooq Ahmed, Uthayakumar Marimuthu
Journal of Testing and Evaluation | Vol. 52 | Issue 1 | 2024
12 Thermal and tensile properties of 3D printed ABS-glass fibre, ABS-glass fibre-carbon fibre hybrid composites made by novel hybrid manufacturing technique
D Aravind Senthilkumar Krishnasamy, N Rajani, Suchart Siengchin, T Senthil Muthu Kumar, M Chandrasekar, Krittirash Yorseng
Journal of Thermoplastic Composite Materials | Vol. 37 | Issue 1 | 2024
13 Synthesis and characterization of cardo-tetrafunctional hydrophobic polybenzoxazine composites for low-k application
Harinei Srinivasan, Pavithra Saravanan, Priyanka Madesh, Balaji Krishnasamy, Hariharan Arumugam, Alagar Muthukaruppan
Polymer Bulletin | Vol. 81 | Pages 887 – 907 | 2024
14 A cryptographic method to have a secure communication of health care digital data into the cloud
K Selvakumar, S Lokesh
Automatika | Vol. 65 | Issue 1 | 2024
15 Crystallization of struvite family crystals from cow urine: analysis, characterization, and effects of crystallization method, retention time, rate of mixing, and competing ions
Sangeetha V, Devasena M, Indumathi M Nambi, Sharmilee Dwarakanathan
Biomass Conversion and Biorefinery | Vol. 14 | Pages 2357 – 2368 | 2024
16 Thermal comfort enhancement of office buildings located under warm and humid climate through phase change material and insulation coupled with natural ventilation
Pappu Arumugam, Velraj Ramalingam
Sustainable Energy Technologies and Assessments | Vol. 63 | 103657 | 2024
17 Recycling of thermoset waste/high-density polyethylene composites: Examining the thermal properties
D Periasamy, B Manoharan, K Niranjana, D Aravind, S Krishnasamy, V Natarajan
Polymer Composites | Vol. 45 | Issue 3 | Pages 2739 - 2748
18 A correlation study on piezo-embedded carbon fibre reinforced polylactic acid composite: Experimental and numerical modelling
Jerold John Britto John Peter, Antony, Vasanthanathan Arunachalam, Senthilkumar Krishnasamy, Sanjay Mavinkere Rangappa, Suchart Siengchin
Journal of Thermoplastic Composite Materials | 2024
19 Solid particle airjet erosion and corrosion behaviour of AA6063 Aluminium alloy.
G S Samy, M Pethuraj, S Thirumalai Kumaran, G Kalusuraman
Surface Review and letters | 2450068 | 2024
20 HIKS: A K-shell-weighted hybrid approach method for detecting influential nodes in complex networks using possible edge weights
Thota Seshu Chakravarthy, Lokesh Selvaraj
International Journal of Communication Systems | 2024
21 Some studies on optimization of process parameters for wire ARC additive manufacturing of Hastelloy C276 using GRA-GWO hybrid techniques
V. Rajkumar, X. Ajay Vasanth, A. Rajesh Kannan, N. Siva Shanmugam
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 2024
22 A Comprehensive Review of Neonicotinoids: Recent Developments in Electrochemical Detection
A. Kumaravel, S. Sathyamoorthi
Environmental Engineering Science | Vol. 41 | Issue 3 | 2024
23 Role of magnolol embedded fully bio-based benzoxazines for hydrophobic, anti-microbial and anti-corrosion applications
Madesh P., Krishnasamy B., Arumugam H., Muthukaruppan A.
New Journal of Chemistry | Vol. 48 | Issue 8 | Pages 3456 – 3466 | 2024
24 Bio-based treatment of hemp fiber for use as reinforcement of a composite: An effort towards development of green and sustainable polybenzoxazine brake pad
Ibrahim Lawan, Hariharan Argunam, Manunya Okhawilai, Cheol-Hee Ahn, Sarawut Rimdusit
Tribology International | Vol. 193 | 109394 |2024
25 Mechanically robust, fluoride free, bio-inspired and facile fabrication strategy of bio-material coated superhydrophobic cotton fabrics for environmental applications
Selvaraj V., Swarna Karthika T., Mansiya C., Alagar M.
Progress in Organic Coatings | Vol. 189 | 108314 | 2024
26 Production of engineered stone from waste foundry sand using epoxy-phenalkamine binder
Srinivasan D., Ramachandran S., Kannadasan K., Muthukaruppan A., Ismail A.A.M.
Construction and Building Materials | Vol. 419 | 135464 | 2024
27 Effect of cobalt addition on thermal cycling behaviour of Ti50Ni(50−x)cox shape memory alloys
Swaminathan G., Sampath V., Santosh S.
Physica Scripta | Vol. 99 | Issue 3 | 35927 | 2024
28 Certain performance analysis of Islanded microgrid systems stability through biologically activated engineering optimization technique
Ramasamy K., Sundaramurthy A., Vaithiyalingam C
Journal of Intelligent and Fuzzy Systems | Vol. 46 | Issue 2 | Pages 4733 – 4744 | 2024
29 Sustainable Strategies for Fully Biobased Polybenzoxazine Composites from Trifunctional Thymol and Biocarbons: Advancements in High-Dielectric and Antibacterial Corrosion Implementations
Mohamed Mydeen K., Krishnasamy B., Arumugam H., Saravana Mani K., Muthukaruppan A.
ACS Sustainable Chemistry and Engineering | Vol. 12 | Issue 6 | Pages 2225 – 2240 | 2024
30 Evolution, Prospects, and Predicaments of Polymers in Marine Applications: A Potential Successor to Traditional Materials
Dhandapani A., Krishnasamy S., Thiagamani S.M.K., Periasamy D., Muthukumar C., Sundaresan T.K., Ali S., Kurniawan R.
Recycling | Vol. 9 | Issue 1 | 8 | 2024
31 Improvements in properties of polybenzoxazine-based laser-induced graphene (LIG) by alloying with polyimide and modeling of production process
Lawan I., Luengrojanakul P., Charoensuk K., Argunam H., Ahn C.-H., Rimdusit S.
Nanoscale Advances | Vol. 6 | Issue 5 | Page 1556 - 1564 | 2024
32 Modified Dual EKF with Machine Learning Model for Fouling Prediction of Industrial Heat Exchanger
Paruthipulli Kalarikkal R.M., Subbaiah J.
Korean Journal of Chemical Engineering | 2024
33 Development of a Digital Twin Framework for a PV System to Resolve Partial Shading
Karunanidhi B., Ramasamy L., Alexander Stonier A., Sathiasamuel C.R.
Mathematical Problems in Engineering | Vol. 2024 | 8374487 | 2024
34 Experimental investigation on the mechanical and acoustic performance of hemp/kenaf hybrid composites: Influence of different stacking sequences
Arshad M.N., Thiagamani S.M.K., Jeyaguru S., Muthukumar C., Krishnasamy S., Subramaniam J., Khan A., Althomali R.H.
Polymer Composites | 2024
35 A case study on the comparison of teaching–learning and performance evaluation methods applied to engineering students
Sreemahadevan S., Vidya G.
Education and Information Technologies | 2024
36 Structural integrity and mechanical behaviour of magnesium oxide (MgO) as reinforcement in PLA-HDPE composite
Natarajan E., Sekar T., Markandan K., Nesappan S., Selvaraj A.D.A., Sekar S.M.
Emergent Materials | 2024
37 Influence of applied stress on shape memory characteristics of Ni50Ti45Cu5 (at.%) alloy subjected to thermomechanical cycling
Ganesan S., Vedamanickam S., Huchappa A.S.
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications | 2024
38 Bio-based benzoxazine composites derived from magnolol: Promising solution for sustainable alternatives for dielectric and superhydrophobic applications
Madesh P., Krishnasamy B., Arumugam H., Muthukaruppan A.
Polymer Composites | 2024
39 Entropy Generation and Heat Transfer performance of cylindrical tube heat exchanger with perforated conical rings: A Numerical Study
S Anitha, Tiju Thomas
Heat Transfer Research | Vol. 55 | Issue 9 | Pages 17 - 33 | 2024
40 Microstructure, mechanical properties, and corrosion behaviour of wire arc additive manufactured martensitic stainless steel 410 for pressure vessel applications
V R., Shanmugam N.S., Kumar N.P., Kumar K.K., Kannan A.R.
International Journal of Pressure Vessels and Piping | Vol. 209 |105171 | 2024
41 Studies on catalyst assisted low-temperature curing of benzoxazines
Mohamed Mydeen K., Ramachandran S., Krishanasamy B., Muthukaruppan A.
Reactive and Functional Polymers | Vol. 198 | 105880 | 2024
42 Mechanical behaviour of the post processed 3D printed PLA parts using polar and non-polar solvents
Jayakumar N., Arumugam H., Albert Selvaraj A.D.
Polymer Bulletin | Vol. 81 | Issue 5 | Pages 4257 - 4274
43 Durable Electrocatalyst Support Materials Based on N-Doped Mesoporous Carbon Nanofibers with Titanium Nitride Overlay Coating for High-Performance Proton Exchange Membrane Fuel Cells
Ponnusamy P., Panthalingal M.K., Badhirappan G.P., Pullithadathil B.
ACS Applied Nano Materials | Vol. 7 | Issue 5 | Pages 4676 - 4691
44 Unlocking the Potential of Resveratrol-Derived Trifunctional Photosensitive Benzoxazines for Superhydrophobic, Low Dielectric and Photoluminescence Applications
Appasamy S., Krishnasamy B., Arumugam H., Muthukaruppan A.
Journal of Polymers and the Environment | 2024
45 Understanding the mechanism of ultrasonic vibration-assisted drilling (UVAD) for micro-hole formation on silicon wafers using numerical and analytical techniques
Kurniawan R., Chen S., Xu M., Teng H., Chen J., Ali S., Han P.-W., Kiswanto G., Kumaran S.T., Ko T.J.
International Journal of Advanced Manufacturing Technology | 2024
46 Enhanced Cluster Head Selection and Routing in Wireless Sensor Networks Using Fuzzy Logic and Adaptive Cat Swarm Optimization
Aramuthakannan S., Kumar R.R., Mariammal G., Geetha M.
International Journal of Intelligent Engineering and Systems | Vol. 17 | Issue 1 | Pages 721 – 731 | 2024
47 Detection of Brain Tumors using Surrogate-Assisted highly cooperative hyperparameter optimisation approach
Aramuthakannan S., Kumar R.R., Mariammal G., Geetha M.
International Journal of Intelligent Engineering and Systems | Vol. 17 | Issue 1 | Pages 721 – 731 | 2024
48 Synthesis of a new type of bisphenol-BC-based benzoxazines from sustainable bio-phenol for hydrophobic, dielectric and corrosion-resistant applications
Madesh P., Ramachandran S., Krishnasamy B., Muthukaruppan A.
Journal of Macromolecular Science, Part A: Pure and Applied Chemistry | Vol. 61 | Issue 3 | Pages 203 – 212 | 2024
49 An IoT enabled computational model and application development for monitoring cardiovascular risks
Rajaganapathi R., Mahendran R., Sivaganesan D., Vadivel M.R., Joel M.R., Kannan V.
e-Prime - Advances in Electrical Engineering, Electronics and Energy | Vol. 8 | 100513 | 2024
50 Card-bisphenol based bio-silica reinforced poly(urethane-co-benzoxazine) foam for an electrical insulation
Krishnan A., Ramachandran S., Govindaraj L., Muthukaruppan A.
Journal of Environmental Chemical Engineering | Vol. 12 | Issue 3 | 112556 | 2024
51 Mechanical behaviour of the post processed 3D printed PLA parts using polar and non-polar solvents
Jayakumar N., Arumugam H., Albert Selvaraj A.D.
Polymer Bulletin | Vol. 81 | Issue 5 | Pages 4257 – 4274 | 2024
52 Depriving friction stir weld defects in dissimilar aluminum lap joints
Suresh S., Natarajan E., Mohan D.G., Ang C.K., Sudhagar S.
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 2024
53 Structural and photocatalytic properties of magnesium and aluminum co-doped zinc ferrite nanoparticles synthesized by co-precipitation method
Deepannita Chakraborty, S. Kaleemulla
AIP Conference Publication | Vol. 2995 | Issue 1 | 2024
54 Designing Compensators for Reduced Order Systems Using Genetic Algorithms
C. Ganesh, R. Shanmugasundaram, M. Mohamed Iqbal, B. Gunapriya, A. Singaravelan
Lecture Notes in Electrical Engineering | Vol. 1098 | Page 379 - 389 | 2024
55 Automation manufacturing using MES
Manimegalai R., Yashik S., Renuka S., Gomathi B.
AIP Conference Proceedings | Vol. 3035 | 20005 | 2024
56 Unveiling the promise of phase change materials in geopolymer composites: A comprehensive review
Rathinavel N., Aleem A., Murugesan A.
Next Generation Materials for Sustainable Engineering | Pages 11 – 39 | 2024
Publications 2023

Publications 2022

Publications 2021

Publications 2020

Publications 2019

Publications 2018

Publications 2017

Publications 2016